What are the Features of Electro Arc’s model 2-SQT?

The Electro Arc model 2-SQT AC portable metal disintegrator features our 2-S cabinet for easy mobility. This model comes with our IQ head which can disintegrate taps as small as 0-80 inches and up to 2 inches in one pass. Disintegrate larger tooling in multiple passes. This disintegrating head comes with our auto feed option

What accessories do I need for my metal disintegrator?

Electro Arc accessories include: Electro Arc water primer (coolant)  – Water Primer is essential to the proper operation of your machine.  Using the metal disintegrator without water primer or with the wrong kind of water primer can cause permanent damage to the machine.  Never operate your Electro Arc metal disintegrating machine with dirty coolant.  This could

Is it time to rebuild your Disintegrating Head?

Rebuilding your Electro Arc disintegrating head can save you money in the long run, prevent damage to your machine. reduce noise levels and eliminate the chief causes of downtime for your business. When you rebuild your  IQ disintegrating head here’s what you can expect. We always disassemble, clean, and test all components to determine what

What is Spark Erosion Used For?

Did you know that EDM technology was more widely accepted in Eastern countries?  Existing manufacturing processes in the United States were already in use when EDM technologies were developed.  This made it more expensive for shops to invest in these new machines.  In countries EDM technologies including metal disintegrators were called “Spark Eroders” because of

The Electro Arc Process Removes broken Taps, Bolts, and Drills in Minutes

Electro Arc’s process disintegrates out your broken bolt, tap, drill, and other tooling with no damage to the threads.  Easily remove broken tooling in 3 simple steps. Choose the correct size electrode. Disintegrate it!  Remove the broken tooling in minutes with our disintegrators. Remove the pieces from the hole, leaving the threads intact! This process

Electro Arc Metal Disintegrators can remove Broken Drills, Broken Taps, Seized bolts, Sheared Studs, and more!

Electro arc metal disintegrators are designed to remove not only broken bolts, taps, and studs but also sheared bolts and seized bearings, saving your expensive parts. This method works if you are working with a recessed fragment, multiple methods are recommended, depending on the size of your broken tooling.  You can also use square or

How are Metal Disintegrators Beneficial in Your Industry?

Industrial applications for Electro Arc metal disintegrators are far and wide.  If you need to remove broken tooling fast, the Electro Arc metal disintegrator is your best bet. Construction and off-road applications for metal disintegrators include the ability to repair off-road equipment onsite, enabling work to continue quickly. Broken rear wheel studs are no longer

Are EDM and MDM the same thing?

While EDM and MDM evolved from the same breakthrough in technology, they are different methods using the same concept. If you are not sure if you need MDM or EDM here is a comparison of the two methods. Electrical discharge machining (EDM) may be referred to as spark eroding and includes many sub-categories including die