The model 2-SC is our most versatile and powerful portable DC metal disintegrator. This machine will disintegrate your HSS, Hard, and Soft metals as well as all Carbide. The disintegrating head is a heavy-duty assembly with an automatic servo feed system. You can use this machine to remove broken taps from #2 (2 mm) up…
The model 2DBQT was replaced about 18 years ago. It is now called the model 2DVQT. This is the exact same machine except; the cross arms were rotated 90 degrees for greater stability and rigidity. This engineering change was a 30% improvement with the cross arms fully extended. Electro Arc Metal Disintegrators were first introduced…
Storing your Electro Arc Metal Disintegrator Electro Arc Metal Disintegrators are known to last for 50+ years. This heavy-duty equipment used on-site and in shops and factories tends to see quite a bit of heavy use. We do recommend wiping down your machine and disintegrating head after each use as a regular maintenance task. Machines…
Simple to Operate – Electro Arc metal disintegrators are engineered to operate worry-free. There are no warning indicators, no pressure gauges, or special adjustments to make after the disintegration process. Power: The 15 or 10-KVA power supply (now includes 20KVA) supplied with Electro Arc metal disintegrators allows you to disintegrate holes as large as 1 inch through…
The coolant system is essential to the metal disintegrating process. Your metal disintegrator heats the electrode to 5000 degrees in order to disintegrate the metal, the coolant cools this temperature down so that no damage occurs to the electrode or part during the process. It also prevents the machine from overheating. It is important to…
Uni-Tek Manufacturing Co. started in 1954 in Frankfort Illinois by Harold Sexaur. Their facility consisted of 9000 square feet. Their internal design team was headed by former team members of the original American team to develop EDM technology with Electro Arc founder, Harold Stark. Uni-Tek metal disintegrator machines differed from Electro Arc’s by using DC…
Electro Arc disintegrating heads are designed to be used at any angle, which helps you disintegrate broken tooling in hard-to-reach areas. If you are disintegrating in large or deep holes you may need to use a shank or extension with your electrode. When you are using a metal disintegrator it is recommended that you keep…
Electro Arc has been making metal disintegrators since 1947, longer than any other company. In fact, the original owner of Electro Arc was part of the American team to develop the technology for MDM (Metal disintegrating machines) a subcategory of EDM. This means there are a lot of used machines on the market. They may…
If you have limited space, or need to take your metal disintegrator to a large part to disintegrate out a broken bolt, tap or other tooling chances are you are a portable metal disintegrator owner. Electro Arc offers a wide variety of portable metal disintegrators that meet your mobility needs. When you purchase a portable…