How to Hook up your Model 2-S for Disintegration

Getting Started with an Electro Arc Model 2-S Metal Disintegrator The first thing to remember when you have a new (or new to you!) metal disintegrator is that it must match your building’s power.  Our transformers are built at the time of the machine build and cannot be changed.  Power voltage options are: 120 240

Use a Metal Disintegrator for Broken Bolt, Screw or Pin Removal

You can easily remove broken bolts, studs, and pins with an  Electro Arc metal disintegrator.   Use your Electro Arc metal disintegrator for dowel pin removal.  For example, to remove a 1/2″ x 2″ stainless steel dowel pin with our 2-DVQT with 20 KVA power supply, you will use a .250 molybdenum electrode.   To do this,

Electro Arc Features in a Competitive Market

Simple to Operate – Electro Arc metal disintegrators are engineered to operate worry-free.  There are no warning indicators, no pressure gauges, or special adjustments to make after the disintegration process.   Power: The 15 or 10-KVA power supply (now includes 20KVA)  supplied with Electro Arc metal disintegrators allows you to disintegrate holes as large as 1 inch through

Did you know Electro Arc owns Uni-Tek?

Uni-Tek Manufacturing Co. started in 1954 in Frankfort Illinois by Harold Sexaur.  Their facility consisted of 9000 square feet. Their internal design team was headed by former team members of the original American team to develop EDM technology with Electro Arc founder, Harold Stark. Uni-Tek metal disintegrator machines differed from Electro Arc’s by using DC

How do you Disintegrate in Difficult to Reach Areas?

Electro Arc disintegrating heads are designed to be used at any angle, which helps you disintegrate broken tooling in hard-to-reach areas.  If you are disintegrating in large or deep holes you may need to use a shank or extension with your electrode.  When you are using a metal disintegrator it is recommended that you keep

The Electro Arc Process Removes broken Taps, Bolts, and Drills in Minutes

3 Steps to Remove Broken Tooling Electro Arc’s process disintegrates out your broken bolt, tap, drill, and other tooling with no damage to the threads.  Easily remove broken tooling in 3 simple steps. Choose the correct size electrode. Disintegrate it!  Remove the broken tooling in minutes with our disintegrators. Remove the pieces from the hole,