How do you Disintegrate in Difficult to Reach Areas?

Electro Arc disintegrating heads are designed to be used at any angle, which helps you disintegrate broken tooling in hard-to-reach areas.  If you are disintegrating in large or deep holes you may need to use a shank or extension with your electrode.  When you are using a metal disintegrator it is recommended that you keep

How is the Troubleshooting Guide Different than the Manual for my machine?

Your Machine’s manual is set up to help you get started with your machine from the moment it arrives, through years of maintenance and repair.   We provide instructions for un-crating and setting up your machine, recommendations for getting started with your machine, guidance for disintegrating as well as schematics of your machine including part numbers.

What are the Features of Electro Arc’s model 2-SQT?

The Electro Arc model 2-SQT AC portable metal disintegrator features our 2-S cabinet for easy mobility. This model comes with our IQ head which can disintegrate taps as small as 0-80 inches and up to 2 inches in one pass. Disintegrate larger tooling in multiple passes. This disintegrating head comes with our auto feed option

What is Spark Erosion Used For?

Did you know that EDM technology was more widely accepted in Eastern countries?  Existing manufacturing processes in the United States were already in use when EDM technologies were developed.  This made it more expensive for shops to invest in these new machines.  In countries EDM technologies including metal disintegrators were called “Spark Eroders” because of

The Electro Arc Process Removes broken Taps, Bolts, and Drills in Minutes

Electro Arc’s process disintegrates out your broken bolt, tap, drill, and other tooling with no damage to the threads.  Easily remove broken tooling in 3 simple steps. Choose the correct size electrode. Disintegrate it!  Remove the broken tooling in minutes with our disintegrators. Remove the pieces from the hole, leaving the threads intact! This process

Are EDM and MDM the same thing?

While EDM and MDM evolved from the same breakthrough in technology, they are different methods using the same concept. If you are not sure if you need MDM or EDM here is a comparison of the two methods. Electrical discharge machining (EDM) may be referred to as spark eroding and includes many sub-categories including die

Metal Disintegration Terminology

Your Introduction to Metal Disintegration Terminology – Infographic Electrical Discharge Machining (EDM) EDM is similar to MDM but they are different forms of the same technology.  Electrical discharge machining has evolved since its discovery and aid in many forms of manufacturing.  Some subcategories of EDM include wire EDM, and die sink EDM.  These tools are