The Electro Arc Process Removes broken Taps, Bolts, and Drills in Minutes

Electro Arc’s process disintegrates out your broken bolt, tap, drill, and other tooling with no damage to the threads.  Easily remove broken tooling in 3 simple steps. Choose the correct size electrode. Disintegrate it!  Remove the broken tooling in minutes with our disintegrators. Remove the pieces from the hole, leaving the threads intact! This process

Electro Arc Metal Disintegrators can remove Broken Drills, Broken Taps, Seized bolts, Sheared Studs, and more!

Electro arc metal disintegrators are designed to remove not only broken bolts, taps, and studs but also sheared bolts and seized bearings, saving your expensive parts. This method works if you are working with a recessed fragment, multiple methods are recommended, depending on the size of your broken tooling.  You can also use square or

How are Metal Disintegrators Beneficial in Your Industry?

Industrial applications for Electro Arc metal disintegrators are far and wide.  If you need to remove broken tooling fast, the Electro Arc metal disintegrator is your best bet. Construction and off-road applications for metal disintegrators include the ability to repair off-road equipment onsite, enabling work to continue quickly. Broken rear wheel studs are no longer

Are EDM and MDM the same thing?

While EDM and MDM evolved from the same breakthrough in technology, they are different methods using the same concept. If you are not sure if you need MDM or EDM here is a comparison of the two methods. Electrical discharge machining (EDM) may be referred to as spark eroding and includes many sub-categories including die

10 Easy Steps to Operating your metal disintegrator

Download this guide Quick Operating Instructions for your Metal Disintegrator Follow the 10 easy steps below to get your machine ready to disintegrate. Please note these steps may vary slightly if you are not using a machine with a fixture.   Refer to our Setup and operation section for instructions by machine model. This quick guide

Metal Disintegration Terminology

Your Introduction to Metal Disintegration Terminology – Infographic Electrical Discharge Machining (EDM) EDM is similar to MDM but they are different forms of the same technology.  Electrical discharge machining has evolved since its discovery and aid in many forms of manufacturing.  Some subcategories of EDM include wire EDM, and die sink EDM.  These tools are